Prochem Peak GTX User Manual download pdf (Page 12)

Installation

Dealer Responsibility

Your distributor from whom you purchased this mobile

cleaning unit is responsible for correct installation of

this machine. The dealer is also responsible for initial

training of your operators and maintenance personnel

in proper operation and maintenance of this unit.

Vehicle Requirements

1. The unit should NOT be mounted in any motor

vehicle of less than 3/4 ton capacity.

DO NOT exceed the vehicle’s axle weight limit.

Include the console, full tanks, accessories, and

operators in calculations.

2. If mounting in a trailer, make certain that trailer is

rated for the total weight of UNIT AND TRAILER.

Electric or hydraulic brakes should be provided,

and a strict compliance with any State and Federal

vehicle laws must be maintained.

3. The vehicle tires should have a load rating above

the combined vehicle and unit weight.

4. We do not recommend using flooring materials that

absorb water. This could result in rust and

corrosion of the vehicle floor.

5. Padding under rubber floor mats should be

removed before installing this unit.

6. We highly recommend using a drip tray under

console (Part #86055040).

7. If using a trailer, console should be positioned so

that it balances properly with respect to axle. Ten

percent (10%) of the overall unit weight should be

on tongue.

Example: If loaded trailer weight is 2,000 lbs.,

tongue weight needs to be a minimum of 200 lbs.

to tow properly.

86325860 PEAK GTX PROCHEM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 139 140

No comments

Prochem Peak GTX User Manual Page 12