Prochem Peak GTX User Manual download pdf (Page 39)

Maintenance

DO NOT service this unit while it is running. The high-

speed mechanical parts as well as high temperature

components may result in severe injury, severed limbs,

or fatality.

NOTE: Use the hour meter as a guide for

coordinating the maintenance schedule.

Engine

(Refer to engine manufacturer's manual for specific

maintenance instructions)

1. Check the engine oil level daily, when in use.

Make certain that proper oil level is maintained.

NEVER overfill.

2. Change the break-in oil after the first 25 hours of

operation. Thereafter, change oil and filter every

100 hours of operation. USE ONLY ENGINE

MANUFACTURER’S BRAND OIL FILTERS.

USING ANY OTHER TYPE OIL FILTER WILL

VOID YOUR ENGINE WARRANTY.

Oil Recommendation. See "ENGINE OIL REQUIRE-

MENTS" in Operations section.

NOTE: Using less than service class SF or SG oil or

extending oil change intervals longer than

recommended can cause engine damage.

Engine oil capacity including filter is approximately 1.7 -

1.9 quarts.

3. Re-torque the manifold and exhaust tube nuts,

cylinder head bolts, and carburetor attaching nuts

after the first 200 hours of use.

4. Check the spark plugs every 200 hours. Clean if

necessary. Replace the spark plugs every 1000

hours.

NOTE: Never sandblast spark plugs. Spark plugs

should be cleaned by scraping or wire brushing.

5. Clean the air cleaner element every 200 hours.

Replace the element every 2400 hours

6. Check the engine idle RPM every 200 hours and

adjust, if necessary. NEVER adjust engine RPM

without a tachometer. Refer to Kohler Engine

Operation and Service Manual.

7. Check the coolant level in the radiator overflow

container daily. If no coolant is seen, remove the

cap and add coolant. Change the coolant with a

50:50 coolant to water ratio every 1000 hours.

50:50 mixture guards against corrosion.

8. Replace the in-line gas filter yearly.

NOTE: For additional engine service information,

obtain the engine manufacturer’s manual from any

authorized service center. If service or repair is

required, contact an authorized engine

manufacturer’s service center. You will need to

provide the serial number of the engine.

86325860 PEAK GTX PROCHEM

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 139 140

Comments to this Manuals

No comments

Prochem Peak GTX User Manual Page 39

Comments to this Manuals

Related products and manuals for Equipment Prochem Peak GTX